Deck repair
Damaged structure is repaired before any new metal is installed.
Metal Roofing
Metal Roof Replacement Midland Park, NJ
A Midland Park roofer can tear off an old metal roof, re-cover it with new metal or replace a shingle roof with metal, after checking the framing and decking underneath. One call to (551) 370-0731 reaches a nearby roofer who replaces metal roofs.
A metal roof needs replacing when the metal itself is failing, not just the screws. When panels are perforated by rust, the finish is gone and every screw hole has been enlarged by years of movement, repairs stop keeping up. Older galvanized roofs with little coating left are the common candidates.
There are a few ways to replace a metal roof, and the right one depends on what is underneath. A full tear-off removes the old panels and trim so the purlins or deck can be inspected and repaired, then new metal goes on. A re-cover, or retrofit, installs new metal over the old panels on new sub-framing, which is common on shops and large buildings.
Plenty of homeowners replace an old shingle roof with metal rather than more shingles. The shingles can come off or, if local code permits and the deck is sound, the metal can go over them. Have the age, roof type and leak history ready when you call.
Metal Roof Replacement is often paired with metal roof installation and metal roof repair, depending on the cause.
Looking for Midland Park metal roof replacement? Call (551) 370-0731 and describe the problem to a roofer who works in Midland Park.
Call nowThe process
The metal roof replacement process
The order of work depends on tear-off or re-cover, but the basics are the same.
Assess the old roof
The old roof and the structure beneath it are evaluated for rust, rot and fastener holding power. It also tells whether the framing needs work first.
Choose the approach
The roofer and owner pick the panel profile, metal and color and decide how the old roof will be handled. Switching to standing seam usually means adding solid decking.
Remove the old roof
The crew unscrews and lifts off the old metal, stacking it for recycling. The roof is never left open overnight.
Fix the purlins
Rotten purlins are replaced, loose ones refastened and soft decking cut out and renewed. New screws in rotten wood would fail within a few seasons.
Install the new metal
High-temperature underlayment, new trim, panels, closures and flashing go on in order from the eaves up. Every edge gets new matching trim.
What is included
A complete metal replacement
Old roof removal
Old metal panels, trim and fasteners are removed and taken for recycling.
Metal panels
New panels in the chosen profile, gauge and finish replace the old roof.
New trim
New trim and boots at walls and penetrations instead of reusing old pieces.
Re-cover option
Where suitable, new metal goes over the old roof on sub-framing when the structure checks out.
Related service
Metal Roof Panel Replacement Midland Park, NJ
Metal roof panel replacement swaps out individual damaged panels instead of the whole roof. On exposed fastener roofs, the roofer removes the screws on the damaged panel and the overlapping edges of its neighbors, slides it out and sets a new one in sealant. Standing seam panels can be replaced too, but it takes more work to unseam and reseam the neighbors.
Many Midland Park roofs need only a few panels replaced after a storm or a falling limb. Expect a slight color difference between new and old metal. If many panels need swapping, a full replacement may make more sense.
Related service
Metal Roof Over Shingles Midland Park, NJ
A metal roof over shingles skips the tear-off and installs panels over the current shingle layer. Battens or a new underlayment layer go over the shingles, then the metal is fastened into the decking below.
The tradeoff is that nobody sees the deck. Before going over shingles on a Midland Park home, the deck is checked from inside and any soft areas are found. Any sign of rot, or a second layer of shingles, tips the decision to tear-off.
Local help
Metal Roof Replacement Near Me
Around Midland Park, metal reroofs range from rusted farm buildings to houses getting their first standing seam roof. From Midland Park out to neighboring towns such as Waldwick, Ridgewood, Allendale and Glen Rock, older metal roofs tend to need full replacement once the coating is gone, and newer houses are adding metal as their shingle roofs wear out, so it pays to have the framing checked before deciding on a re-cover.
For metal roof replacement in Midland Park, NJ or nearby towns like Waldwick, Ridgewood, Allendale and Glen Rock, call (551) 370-0731 to reach a roofer who covers your street.
How the weather here affects roofs around Midland Park
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Midland Park, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Less damage
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Local knowledge
Local roofers see the same roofs and storm damage across Midland Park and nearby towns.
Know what happens next
Ask your questions before you agree to anything.
Metal Roof Replacement FAQ
What is a metal roof retrofit?
In a retrofit, new panels go over the old roof on spacers or purlins. It avoids tear-off and keeps the building closed during work, which is why it is common on shops, barns and commercial buildings. An engineer or roofer confirms the framing can carry the added load.
What happens to the old metal roofing?
Old steel and aluminum panels are routinely taken to a scrap metal recycler. Metal can be melted down and reused, so it rarely goes to the landfill. Your roofer can explain how the old metal will be hauled away.
Can a metal roof be installed over shingles?
Where code permits, metal can go over a single layer of shingles. The upside is skipping tear-off, while the downside is not seeing the decking. A roofer can tell you which option fits your house.
When does a metal roof need replacing instead of repair?
The tipping point comes when rust or wear is spread across the roof, not just in a few spots. Widespread rust-through, failed paint and stripped holes everywhere usually mean new metal. A roofer can tell you which sections can be saved after a look at the roof and the framing.
How is a single metal roof panel replaced?
Single panel replacement is common on exposed fastener roofs. The roofer unscrews the panel and its laps, removes it and fastens a matching one in place. New panels may look brighter than the old ones at first.
More questions? Call (551) 370-0731
Other services that may help
Metal Roof Installation
New metal roofs in standing seam, exposed fastener, metal shingle and stone coated steel, for homes, garages and outbuildings.
Learn moreMetal Roof Repair
Repairs for leaking fasteners, open seams, rusted panels and failed flashing on a metal roof, matched to exposed fastener and standing seam roofs alike.
Learn moreRoof Replacement
Full tear-off and replacement for roofs that are worn out, storm beaten or leaking in several places, with the old layers removed and the deck checked.
Learn moreStanding Seam Metal Roof
Standing seam metal roofs with concealed clips, raised seams and no exposed screws in the panels, for homes, additions and low slope roofs.
Learn more
Looking for something else?
See all roofing servicesNeed metal roof replacement in Midland Park, NJ?
Call (551) 370-0731 for a local roofer in Midland Park and nearby towns.