Insulation
A cover board protects the insulation under the rubber.
Flat Roofing
Rubber Roof Installation Midland Park, NJ
Installing a rubber roof in Midland Park means choosing the EPDM thickness and attachment method, then flashing walls, curbs and edges so the membrane can move without tearing, and explain each choice before the sheet is rolled out. Dial (551) 370-0731 to talk with a local roofer about a new rubber roof.
EPDM is the material most people mean when they say rubber roof. The membrane is thick, stretchy rubber that tolerates temperature swings and resists hail and sunlight well. That flexibility is why it suits so many homes.
EPDM can be attached in three main ways. Adhered, fastened and ballasted systems each suit different buildings and wind conditions. For homes, adhered EPDM is the most common choice.
Then comes thickness and color. Thicker 60 mil membrane stands up better to foot traffic and hail. Black is standard and holds heat, while white reflects it. The installer also plans how the membrane laps under shingles above it and up the wall beside it, where leaks tend to start.
Rubber Roof Installation is often paired with rubber roof repair and flat roof installation, depending on the cause.
Need rubber roof installation in Midland Park? Call (551) 370-0731 to reach a nearby roofing contractor.
Call nowThe process
How rubber roof installation works
Here is how a roofer typically installs an EPDM roof.
Deck prep
The deck is repaired and checked for slope, ideally a quarter inch per foot toward drains or gutters. Old roofing is removed if the roof is being replaced.
Insulation
Polyiso insulation and a cover board create a flat, firm base for the rubber. Slope can be built in at this stage.
Sheet layout
The membrane is unrolled, aligned and allowed to settle before bonding. Seams are planned so they run with the slope.
Apply adhesive
Bonding adhesive is rolled onto both the cover board and the underside of the rubber, then the sheet is folded back down and broomed smooth. Each half gets the same treatment in turn. Any trapped air is worked out so the sheet lies flat and does not blister.
Seal the seams
Primer and seam tape join the sheets, with T-joints covered by extra patches. Lap sealant goes along exposed tape edges.
Flash the details
Flashing goes up walls and around curbs, with boots at pipes and new edge metal at the perimeter. Counter flashing covers the top of wall flashing. The last step is probing each seam and patch for gaps.
What is included
What rubber roof installation covers
Seam tape
Seams are primed, taped and rolled for a lasting bond.
Flashing
Termination bar, pipe boots and edge metal are installed with materials made for EPDM.
Deck preparation
The base is cleared and checked for a sound start.
Rubber sheet
Wide sheets of EPDM cover the roof with as few seams as possible.
Related service
EPDM Roof Installation Midland Park, NJ
Installing EPDM well comes down to preparation, seams and flashing. Rushing the adhesive, skipping primer or leaving wrinkles under the sheet are the common mistakes. Dry, mild days give the best bond. The field and the flashings may get different adhesives, since vertical surfaces need a stronger grip.
In Midland Park, an experienced EPDM installer leaves room for the membrane to move and age. Flashing at walls and curbs is secured with termination bar so the sheet cannot pull loose as it ages, and corners get flexible uncured flashing. Ask about edge securement before work starts.
Local help
Rubber Roof Installation Near Me
Around Midland Park, homeowners often choose EPDM for flat roof sections because it is durable and easy to repair. Homes in Midland Park and nearby places including Waldwick, Ridgewood, Allendale and Glen Rock benefit from rubber roofing because it flexes with the seasons, and the right installer makes a big difference.
Searching for rubber roof installation near me from Midland Park or Waldwick, Ridgewood, Allendale and Glen Rock? Call (551) 370-0731 to talk to a roofer who works in your part of town.
How the weather here affects roofs around Midland Park
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Midland Park is busiest after a hard winter and before the next one.
Why call
Why fix it now
Less damage
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers who know Midland Park
Local roofers see the same roofs and storm damage across Midland Park and nearby towns.
Straight answers
Ask your questions before you agree to anything.
Common questions about rubber roof installation
Should my rubber roof be black or white?
The choice depends on the climate and the space below. Black holds heat and white reflects it. Talk through the choice with a roofer.
What is the difference between EPDM and TPO?
They are related but not the same. EPDM is usually black, very flexible and seamed with tape, while TPO is usually white, more reflective and heat welded at the seams. Both are common on flat roofs.
Which EPDM thickness should I choose?
The common choices are 45 mil and 60 mil. Sixty mil resists punctures better and lasts longer, which helps on roofs with foot traffic or hail. Even thicker sheets are available for demanding roofs.
Is it possible to install EPDM over the old roof?
Recovering depends on the condition of the old roof. The old roof must be a single dry layer, with a recover board over it. Otherwise, a tear-off is needed. A moisture check of the old roof settles the question before any work is planned.
How long does a new rubber roof last?
Rubber roofs often last decades. Thickness, seam quality and maintenance all affect its life. Patching EPDM is straightforward.
More questions? Call (551) 370-0731
Related services
Rubber Roof Repair
Repairs for leaking rubber roofs, from peeling seams to pulled flashing at walls and curbs, never with tar or asphalt cement that ruins the rubber.
Learn moreFlat Roof Installation
Flat roof installation from the deck and tapered insulation up to the seams, flashing and edge metal, with every wall, curb and penetration flashed properly.
Learn moreTPO Roofing
TPO membrane roofs installed over new insulation or in place of a worn flat roof, built around proper drainage, flashing and edge metal.
Learn moreFlat Roof Replacement
Tearing off or recovering a worn flat roof and installing a new membrane, insulation and edge metal, and new flashing at every wall, curb and drain.
Learn more
Looking for something else?
See all roofing servicesTalk to a Midland Park roofer about rubber roof installation
Call (551) 370-0731 to talk to a roofer serving Midland Park, NJ.