Waterproof layer
The deck is covered with underlayment suited to the slope as the real barrier against water.
Tile Roofing
Tile Roof Installation Midland Park, NJ
A Midland Park tile roofer can help choose between clay and concrete, flat or curved profiles, and install the full system beneath the tile. Call (551) 370-0731 to reach a local roofer who installs tile.
The first decision on a tile roof has nothing to do with color. A tile roof weighs several times as much as asphalt shingles, and a home built for shingles may need an engineer to check the rafters or trusses before switching. Houses designed for tile already account for that load in their framing.
Then comes choosing the tile itself. Clay tile is fired, keeps its color for a very long time and is lighter than most concrete tile, while concrete tile comes in many profiles and slowly fades as its surface weathers. The profile can be flat, low curve or high curve, and each handles water and wind a little differently.
A tile roof is only as good as the underlayment and flashing hidden beneath it. Codes typically allow tile on slopes down to 2.5 in 12, with two layers of underlayment required on slopes under 4 in 12. Choosing a long lasting underlayment now is what keeps the roof from needing a relay in twenty years.
Depending on what the roofer finds, tile roof installation in Midland Park, NJ can go hand in hand with tile roof replacement and roof installation.
Looking for Midland Park tile roof installation? Call (551) 370-0731 and describe the problem to a roofer who works in Midland Park.
Call nowThe process
What happens during a tile roof installation
A tile roof goes on in layers, and the tile is the last of them.
Confirm the framing
Before ordering tile, the load on the rafters or trusses is checked, reinforcement is planned if needed and the permit is filed. It is smart to keep a stack of spare tile from the same batch for future repairs.
Lay the underlayment
Solid sheathing is inspected and renailed, then the roof is dried in with underlayment, doubled where the slope calls for it. Since this layer does the waterproofing, it is where quality matters most.
Install battens
Battens run horizontally to hold each course of tile, often raised on counter battens to leave a drainage and air space below. That air space under the tile helps the roof shed heat and dry out.
Flash every penetration
Flashing goes in at valleys, sidewalls, headwalls, skylights and pipes, sized for the deep profile of tile. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Fasten each course
Courses are laid from the bottom up, starting over a raised eave or bird stop, and every tile is fastened to resist uplift. Cut edges at valleys and hips are fitted and secured carefully.
Finish the ridge
Hips and ridges are capped, often with a mechanically fastened system that allows ridge ventilation. Any tile cracked during the job is replaced before cleanup.
What is included
Parts of a tile roof installation
Structural review
An engineer or span check confirms the structure especially when replacing shingles.
Tile fastening
Tile is fastened with nails, screws, clips or adhesive so tiles stay put in strong wind.
Eave closures
The first course gets an eave closure and the ridge gets capped so birds and wind-driven rain stay out.
Valley metal
Wide valley metal and shaped wall flashings are installed so water stays on top of the underlayment.
Related service
Barrel Tile Roof Installation Midland Park, NJ
Barrel tiles go on in pairs, with pans forming the water channels and rounded covers overlapping the gaps. The tapered shape lets each tile nest into the one below, creating the deep rolling texture barrel roofs are known for. Because of that depth, barrel tile needs careful work at the eaves, hips and ridges, where the open curves must be closed off.
On a Midland Park barrel tile roof, the cover tiles are the ones wind targets, so how they are fastened matters most. A crew snaps lines so pans and covers stay straight from eave to ridge.
Related service
Spanish Tile Roof Installation Midland Park, NJ
Spanish tile, also called S tile, merges the curved pan and cover into one interlocking piece. Both clay and concrete versions are made, in solid colors or blends from deep red to earth tones. Side interlocks help it shed water, though the curved ends need bird stops and ridge closures just like barrel tile.
A Spanish tile roof on a Midland Park home starts with the same foundation as any tile roof: sound framing and a solid underlayment. Flashing around chimneys, walls and skylights has to be shaped to the S curve, often with formed metal or a flexible flashing material. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
Around Midland Park, tile is installed on new construction designed for its weight and on existing homes being upgraded. In Midland Park and neighboring communities including Waldwick, Ridgewood, Allendale and Glen Rock, the biggest variable on a conversion is whether the existing framing can carry tile, and local wind requirements decide how each tile has to be fastened.
Searching for tile roof installation near me from Midland Park or Waldwick, Ridgewood, Allendale and Glen Rock? Call (551) 370-0731 to talk to a roofer who works in your part of town.
How the weather here affects roofs around Midland Park
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Midland Park, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Smaller repairs
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Familiar with local homes
Roofers in Midland Park know the roof types and weather wear common in local homes.
Straight answers
Ask the roofer about the cause, the options and the estimate before work starts.
Tile Roof Installation questions
Which underlayment is best for tile?
Tile roofs use heavy felt, synthetic underlayment or self-adhered membrane, sometimes in two layers. The underlayment usually wears out long before the tile, so a durable one delays the first relay. Codes call for two layers on slopes from 2.5 in 12 up to 4 in 12.
Should I choose clay or concrete roof tile?
Both make durable roofs with different tradeoffs. Fired clay holds its color, weighs a bit less and has the longest track record. Concrete tile comes in many profiles and finishes, but it is heavier, absorbs more water and its color fades over time.
How long does tile roof installation take?
A typical home takes longer than a shingle roof, often one to a few weeks depending on size, complexity and weather. Complex rooflines and framing work before tiling can stretch the schedule. Once the underlayment is down, the house is protected from rain while tile goes on.
How heavy is a tile roof?
A tile roof is far heavier than a shingle roof, and concrete tile tends to weigh more than clay. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Lightweight concrete tile is an option for some homes that fall short of the load for standard tile.
Can tile be installed over an existing roof?
A tile roof needs a bare deck, so existing shingles or other roofing are removed. That lets the roofer check the sheathing, replace soft spots and lay a proper underlayment.
More questions? Call (551) 370-0731
Often needed together
Tile Roof Replacement
Replacing a worn tile roof, either by relaying the existing tile over new underlayment or by switching to new tile, done slope by slope to keep the house protected.
Learn moreRoof Installation
Installing a new roof layer by layer, from drip edge and underlayment to flashing, vents and the finished roofing, so it sheds water at every edge and seam.
Learn moreTile Roof Inspection
Tile roof inspections that count broken and slipped tiles, check the layers beneath and estimate how much life is left, before buying a home, after a storm or as the underlayment ages.
Learn moreRoof Ventilation
Roof ventilation work that keeps the attic dry in winter and cooler in summer, based on what the attic actually needs.
Learn more
Looking for something else?
See all roofing servicesTalk to a Midland Park roofer about tile roof installation
Call (551) 370-0731 to talk to a roofer serving Midland Park, NJ.